Home

About

Products

Services

Gallery

Contact

 

 

   Gunsmithing Price List  

Gunsmithing orders are heavy at the moment, turn around times are expected to be 6 to 10 weeks on conversions and full builds. Some smaller jobs can be accomplished more quickly.

 

BASICS

SERVICE FEES

Minimum shop charge

$10.00

Per man hour

$30.00

Per machine hour

$35.00

Parts order, per order

$10.00

Clean and oil (Includes: stripping gun, cleaning all parts, checking for wear and estimate of services needed to return item to "A-1" condition.)

$35.00

Extra charge for heavily soiled / rusted

$10.00

Reassembly

$20.00

GENERAL RIFLE WORK

Test fire

$10.00

Check headspace

$12.00

Check firing pin protrusion

$12.00

Remove fired case from chamber

$15.00

Remove live round from chamber

$33.00

Remove stuck bullet from barrel

$12.00

Remove fouling from barrel

$25.00

Lap barrel

$50.00

Cut and crown barrel

$45.00

Install muzzle brake

$75.00

Polish bolt action interior 400 finish

$170.00

Trigger job

$45.00

GENERAL SHOTGUN WORK

Resolder rib (not including bluing)

$125.00

Resolder fore-end lug

$35.00

Polish chamber / barrel

$20.00

Install screw-in choke tubes

$100.00

Clean, chase threads for screw-in chokes

$15.00

Install adjustable chokes

$100.00

Replace hinge pin

$100.00

Cut and Crown with bead

$30.00

GENERAL HANDGUN WORK

Chamfer revolver barrel

$30.00

Revolver action tune

$40.00

Rebarrel revolver (using new factory barrel)

$80.00

Rebarrel revolver (using aftermarket barrel)

$180.00

Remove / Modify Hammer Spur

$20.00

Semi-auto action tune

$40.00

Tighten .45 slide

$80.00

Fit barrel to .45

$50.00

Fit barrel bushing on .45

$30.00

Bevel magazine well on autos

$40.00

Open / modify ejection port on autos

$40.00

Throat, polish barrel and feed ramp on autos

$25.00

Install custom trigger on .45

$25.00

Install custom hammer on .45

$25.00

Install custom safety on .45

$30.00

Custom grips

POR

SCOPES & SIGHTS

Sight in customers (not including range fee or ammo)

$30.00

Bore sighting

$10.00

Drill and tap for scope base or sights (per hole)

$15.00

Install base, rings, scopes and bore sight

$30.50

Install "Express Sights" (solder on) requires re-bluing, bluing price added after inspection

$50.00

Cut dovetail in barrel

$25.00

Install inset in pistol sight

$25.00

Install front or mid bead on shotguns

$15.00

STOCKS

OILED FINISH:

  • Unfilled oil finish on an average stock

  • Same finish on complicated stock



$100.00
$150.00

HAND RUBBED FINISH:

  • Filled, rubbed oil finish on an average stock

  • Same finish on complicated stock



$125.00
$180.00

SPRAY FINISH:

  • Lacquer or Polyurethane



$140.00

Install recoil pad

$35.00

Install sling studs

$30.00

Glass Bed…Pillar Bed action

$90.00-$150.00

Glass bed action and barrel

$100.00

Glass bed action and free-float barrel

$120.00

Fit, Bed and Finish Fiberglass stock

$200.00

Fit, and bed prefinished fiberglass stock

$100.00

Fit and Finish semi-inletted stock

POR

Custom stocks

POR

REFINISHING

Parkerizing – Long Gun

$150.00

Parkerizing – Hand Gun

$125.00

Hot Blue – Long Gun

$225.00

Hot Blue – Hand Gun

$200.00

Duracoat – Long Gun

$175.00

Duracoat – Hand Gun

$150.00

Moly – Long Gun

$175.00

Moly – Hand Gun

$150.00

Spray Enamel – Long Gun

$125.00

Spray Enamel – Hand Gun

$100.00

COMPLETE AK RIFLE BUILD

Basic AK rifle build with your kit on Millena receiver. (Receiver Included)

$350.00

*Basic AK rifle build with your kit on your  receiver.

$300.00

Machine Receiver for Under Folding Stock add:

$45.00

Machine Receiver for Russian/Bulgarian Side Folding Stock add:

$70.00

Threaded Barrel (Milled receiver kit) machined to fit stamped receiver add:

$60.00

** Duracoat Finishing (Black) add:

$50.00

** Duracoat Finishing (Any other Color) add:

$60.00

** Duracoat Finishing (Camo Patterns)

POR

** Moly Finishing (Black) add:

$50.00

** Moly Finishing (Any other Color) add:

$60.00

** Parkerizing add:

$60.00

AK RECEIVER BUILD

Receiver Fitted to Your Trunions and Bolt Carrier. (Millena Receiver Included)

$200.00

*Receiver Fitted to Your Trunions and Bolt Carrier. (Your Receiver)

$150.00

Machine Receiver for Under Folding Stock add:

$45.00

Machine Receiver for Russian/Bulgarian Side Folding Stock add:

$70.00

Trigger Guard Installed add:

$25.00

Barrel Installed add:

$40.00

Threaded Barrel (Milled receiver kit) machined to fit stamped receiver add:

$60.00

*** Duracoat Finishing (Black) add:

$40.00

*** Duracoat Finishing (Any other Color) add:

$50.00

*** Duracoat Finishing (Camo Patterns)

POR

*** Moly Finishing (Black) add:

$40.00

*** Moly Finishing (Any other Color) add:

$50.00

*** Parkerizing add:

$50.00

 

*We will make every attempt to make your receiver as perfect as possible. But some things can not be corrected easily. We will guaranty that your rifle will function as perfectly as possible with this option.

** Standard finish is high heat acrylic enamel.

*** Unless specified, receiver assemblies will be in the white. Aluminum Oxide blasted and ready for finishing.

SAIGA TACTICAL CONVERSION

* Basic Saiga tactical conversion

$295.00

Polychoke (Shotgun, 12ga. only)

$100.00

** Polychoke Installation - Threaded Barrel "M22 x .75" (Shotgun, 12ga only)

$30.00

** Polychoke Installation - NON-Threaded Barrel "M22 x .75" (Shotgun, 12ga only)

$75.00

Machine vents in handguard

$35.00

Fabricate and install side sling mount (Shotgun)

$40.00

Jerics LRBHO (Shotgun, 12ga only)

$80.00

LRBHO Installation (Shotgun, 12ga only)

$60.00

Modify magazines for LRBHO (w/ supplied plastic tabs)

$20.00

Modify magazines for LRBHO (w/ improved Millena metal tabs)

$25.00

 

*   Includes removal of the original buttstock, installation of a US made 18. 922r compliant pistol grip, buttstock, gas piston and fire control group. Rear trigger pin holes are welded and finished, Barrel is shortened to 16.2” (Rifle) 18.2” (Shotgun) or length specified, gas ports modified to allow proper operation, refinishing in Duracoat HK black, function testing and any other tuning required thereof.

** May require some refinishing work depending on the method use for attachment.

 

DUMMY AMMUNITION

* 9mm (Box of 50)

$35.00

* 45 auto (Box of 50)

$35.00

* 38 spl. (Box of 50)

$35.00

* 357 (Box of 50)

$35.00

* 44mag (Box of 50)

$35.00

* 45 LC (Box of 50)

$35.00

* 50 AE (Box of 25)

$35.00

* 500 S&W Mag (Box of 20)

$35.00

* 223 (Box of 20)

$20.00

* 308 (Box of 20)

$20.00

* 30.06 (Box of 20)

$20.00

* 5.45x39 (Box of 20)

$20.00

* 7.62x39 (Box of 20)

$20.00

 

  • For use in Movie props: New brass and bullets with deactivated primers and steel ball bearing inside of case for verification of safe unloaded round.

  • Most other calibers are available upon request.

 

AK SINGLE STACK TO HI-CAP MAG CONVERSION

* Basic Conversion

$100.00

Option: Barrel Threading 14x1.0 LH for standard AK muzzle devices.

$25.00

 

*   Requires machining of the mag well opening, inner rails, trunion and center support pin  for use of standard AK magazines, removal of trigger guard spacer and reattachment (riveting) of trigger guard. “Some weapons require a new trigger guard assembly”

 

NOTE: This conversion also requires installation of any US made 18. 922r compliant parts which would bring the total imported parts count to 10 or less.

Millena Enterprises will not perform this conversion unless the weapon is already compliant or we can supply the parts to bring the weapon to full compliance.

 

The Following parts must not exceed 10 total Imported:

  • Muzzle Device

  • Barrel

  • Trunions (front and back count as one part)

  • Receiver

  • Gas Piston

  • Bolt

  • Bolt Carrier

  • Trigger

  • Disconnector

  • Hammer

  • Hand Guards (count as one part)

  • Buttstock

  • Pistol Grip

  • Magazine Body

  • Magazine Follower

  • Magazine Floorplate

 

Keep in mind that it's the number of imported countable parts that matter - not the number of US-made parts.

 

Millena Enterprises /  Rio Rancho, NM

Phone: (505) 216-5250 / Fax: (505) 216-1147 / Toll Free: (877) 254-0725

<<<RETURN TO SERVICES PAGE